Design control section Packing Machine

Packing Machine PLC has the versatility, ease of use, wide adaptation, high reliability, anti-interference ability, Packing Machine programming and simple. Program both manufacturers system program, there are users develop their own applications, Packing Machine system program provides operating platform, while also opening for the PLC program l “by converting operation and information and information necessary public process. User program control requirements by the user design. Designed using the principles of design principles enough time, Packing Machine part time and roll harmony.

Stepper motor control using the rotation of the feed roller automatic feed function, paper feed rollers with intermittent l movement is born, the use of ordinary Packing Machine motors are difficult to achieve, and the number of pulses stepper motor is used to control the rotation of the steep angle number, so as to control Packing Machine the stepper motor rotation number, by controlling the pulse frequency to control Packing Machine the motor speed. Feed roller diameter of 76mm, the stepper motor step angle of 1.8. Each feed revolution of stepper motor control, the pulse frequency is set to 200Hz, Packing Machine the number of pulses is set to 200, the time required for feeding a: Number = ()

When the timer count enough for 2.1 seconds, Packing Machine and then proceed to the next station of the action, Packing Machine that brush cutting paper pulp function exercise program. Brush cutting paper pulp with a pneumatic system to achieve some of its reciprocating motion, using the three-way pneumatic valve to ensure the realization of three operating states: Solenoid valve 1 is energized, Packing Machine the piston rod introduced paper cutter cut right away; reaches the right end position encountered a limit switch SQ2 solenoid valve power, Packing Machine the cutter stops moving; waiting time is up, the solenoid valve 2 is energized.