Material level determined by the number of bags Packing Machine

Material level determined by the number of bags Packing Machine , feeding position by a material level controller OK. That a certain number of bags Packing Machine after feeding device feeding , level controller receives the signal to stop feeding . Before using for the bag to be set up automatic number setting method, see the preceding section 6 of Article VI 5 .

Packing Machine Level Controller installation and adjustment steps are as follows :

1 Connect the power : Open Packing Machine lower electrical box door , the wiring from the feeder holes for penetration , were connected to the AC contactor terminals.

In order to open the “total power “, press [ feed ] key ( ie, [9] key ) to observe the feeder direction of rotation in the wrong direction adjustable wiring.

2 Adjust Sensitivity: Sensitivity knob while rotating your hand near the end of the detection distance of about 100 mm ( factory Our company has adjusted ) .

3. Packing Machine mounted on the material level viewing window board. Observation window cover plate can be pressed with layering .

Packing Machine use should pay attention to :

1. Packing Machine Do entrained material in the debris . (2) The fasteners are loose.

3 The upper turning member filling once per one month butter.