Right window displays the amount of the last Packing Machine

1 ) Press the Packing Machine key to clear material Empty weighing hopper . 2 ) Press the [Zero ] key to tare weight, so that the weight is displayed as 0 .

3 ) Press the [Set] key and then press [1] key, the left window shows 〗 〖 bSZ right window displays the amount of the last Packing Machine , Packing Machine weight to be entered and then press [Enter] key. Photoelectric switch and cover the container with Packing Machine splice . After filling until stable weight will sound loudly and automatically corrected. After a few weight machines automatically corrects both stable normal production .

4 Set Automatic for the bag number ( no automatic feeding device does not do this )

Press the [Set] key and then press [7] key, the left window shows 〗 〖 gLdS —- Enter the number of automatic for bag ( recommended no more than 15 ) , enter the number displayed in the lower four input finished, press [ confirm key , usually Packing Machine Specification small can set bigger, on the contrary should be set smaller.

After the above steps, you can work properly . Each block photoelectric switch once to complete a quantitative Packing Machine. Start filling weight may not be accurate , to be completed after the buzzer sounds automatically corrected .